In this installment of TPF, readers will be able to look at an offering by SOG which is a manual opening knife that incorporates SOG’s patented Arc-Lock system. If the title seems somewhat confusing, please do not stop reading as, despite having a long model designation, this blade does have several items that are worthy of being showcased. TPF is pleased to introduce readers to SOG’s Folding Knife Mini X-Ray Vision. This has a distinction of having a very wordy designation for such a small simple knife design that it almost seems out of place.
This knife initially appears to be one of the more basic folders offered by SOG that would be a very capable addition to anyone’s EDC (Every Day Carry) option. This knife has a combo-edge tanto blade that measures 76mm (3.0″) with some two-step serrations, one large followed by two small; repeat. The knife itself is extremely light, massing in at roughly 85gr (3.0 oz), mainly due to the glass reinforced nylon handles that surround the liners.
We here at TPF obviously love the description of this knife on the SOG website. As it resonates with the majority of our tag line.
Two words that best describe the X-Ray Vision series are “tactical” and “practical”.
But is it too fantastical for some? Some aspects may be…
As stated earlier, this knife is a manual opening knife. Manipulating the ambidextrous thumb is the primary method for blade deployment. The Arc-Lock system on the Mini-X-Ray Vision is a spring-loaded, pivoting bar that retains the blade in a closed position with minor spring force. When deploying the blade, the Arc-Lock shifts along the internal profile of the blade until fully deployed, at which time the pivot bar “locks” into a corresponding notch on the profile. The spring is the key feature for the locking mechanism, and if closed, pulling back on the Arc-Lock bar actually begins deployment of the blade. This allows for a “friction-free” deployment of the blade. However, holding the Arc-Lock bar back prevents the blade from locking open.
The two halves of the knife are held together by a quintet of Torx socket, pan head screws with the opposite side appearing as a blind rivet head. The Arc-Lock bar, and thumb studs are a two piece slotted assembly, with only the thumb stud having an exposed thread on the nut side. With the blade in the closed position the knife measures exactly 101.6mm (4.0″) to the end of the pocket clip, and when fully open the overall length stretches to a hair above 178mm (7.0″). Which will bring TPF Online to the only obvious aesthetic error that we can identify…
The countersunk flat head philips screw which is used to secure the pocket clip into position seems out of place. Using a Torx socket version would have kept up the visual appearance across the entire knife, but in the grand scheme of this knife, this is a very minor quibble. The pocket clip has a fairly large mouth and can be mounted to allow the knife to be worn on either a left or right side, tip up carry.
The lines of this knife are crisp and clean with minimal distractions, such as patterned and ornate contoured handles. The simple handle design incorporates a single pronounced finger groove. Combine that with the serrated thumb rise on the blade and the ability to control the blade for a variety of grips and uses is apparent. The pivot of this knife is very smooth, however the teflon washers do allow for a slight amount of blade play side to side.
The blade itself is manufactured from VG-10 steel, with a thickness of 2.5mm (0.10″) and has a bead blasted finish. This steel is normally considered to be a higher end steel that has good qualities regarding corrosion resistance, edge retention, and sharpening ability.
The Mini X-Ray Vision, SOG Model #MXV72-CP, is a very lightweight manual folding knive with a higher quality steel blade. Readers may recall earlier in this write-up we commented on the possible fantastical aspect of this knife. The suggested MSRP of the knife as reviewed is $161.50 USD, but readers can find it at a much more affordable price point at various online outlets across Canada, such as Blades Canada Cutlery Corp., who have a storefront in Vancouver BC. As an EDC knife, this edged tool has all the required options for being a good EDC, possibly excluding the price tag. However, as per the norm for here, it is up to you, our readers, to determine if SOG’s Mini X-Ray Vision falls under the heading of Tactical, Practical, or Fantastical.