SHOT Show 2018…
Another January has come and gone, and with it was once again the largest event of its kind in the world… The 2018 Shooting, Hunting and Outdoor Trade Show was held at the Sands Expo and Convention Center from January 23rd through the 26th. Covering nearly 6 hectares (14.8 acres) of flooring, an excess of 2100 exhibitors displayed their products and services for some 60,000 attendees of the 4 day event. 2018 signified the 40th anniversary of the SHOT Show which started way back in 1979 with 290 exhibitors covering a comparatively miniscule 0.48 hectares (1.1 acres).
Some companies have been at SHOT since its inception and never missed a single show
This year’s SHOT Show also marks the 20th time that SHOT has been hosted in Las Vegas, Nevada; and city that is larger than life seems to be a prefect fit for the SHOT Show. Last year saw nearly 3.2 million kg (3,500 tons) of exhibits moved onto the show floor. To put it mildly, the SHOT Show is unbelievably huge. However there is always a catch when it comes to the biggest and best; the SHOT Show is not open to the general public. That is correct, it is only open to members of the industry and trade. Manufacturers, wholesalers, importers, exporters, retailers, training, non-profit organization and media, all of which are involved in Shooting, Hunting, and Outdoors are able to apply to attend SHOT Show.
The SHOT Show is preceded by Industry Day at the Range on the Monday before the show. This day allows only exhibitor-invited media and buyers to come out to Boulder City Rifle & Pistol Club and experience first hand the products offered by over 160 companies. Everything from crossbows to handguns, throwing axes to fully automatic rifles and everything in-between. With over 1400 media and 800 buyers potentially being on site during this day, Industry Day continues to be the premier hunting and shooting event in the industry providing hands-on experience for attendees. The one caveat is the same as during SHOT Show itself, members of the public are not allowed.
The lineup of Media personalities at 8:00am Monday morning at Industry Day at the Range
Early in the day, the parking is already pretty full and the buses kept coming all day long
The view to the SE of the long distance area. Ram truck testing at the top, to the upper right is the shotgun area
Looking to the NW from the top of the long range shooting area
View from behind the covered long-range shooting area
The closest steel is 50 yards from the shooting area, with 980+ yards for the ultimate reach. See the orange on the closer hills? Those are/were clays
This was the author’s 12th year of attending the SHOT Show and I was accompanied by some long time attendees who had an additional dozen or more shows under their belts. The SHOT Show is now less fun and exciting than it used to be, likely due to the more structured and business oriented planning now done by the author. However, attending the event has always left the author with a sense of awe at the sheer scale of firearms and accessories that are even out there. In perspective; Canada’s outdoor hunting, sporting market brings in roughly $6.5 billion in annual revenue. SHOT Show has that value of product and exhibits on display. Damned!
Now SHOT Show does bring in companies that have absolutely anything remotely to do with the firearms industry, and that includes law enforcement as well as other enterprises. However in a dozen years this had to be the first time the author noticed certain things that never had been at the show previously or escaped notice. With an excess of 1800 exhibitors, you will always miss something when attending, but some stuff is also new…
Professional equipment to dispose of firearms… See the scrolling “free demonstration”… TPF felt a bit nauseous here
While it is a purely marketing gimmick, as a Canadian, the author will take the FAL please
A quick series of images showing the scale of the show
The other direction. This is the narrow width of the main room. SHOT is big…
Sometimes you can get lucky and notice some celebrities. In the centre is the original Incredible Hulk. Mr. Lou Ferrigno
A sampling of exhibitors at SHOT Show
IF you thought that the Industry Day at the Range would be the favourite of the author’s annual pilgrimage to SHOT, you would be very close indeed. However, it is the now huge Canadian event that keeps the author coming back every year. The Canadian Shooting Sports Association (CSSA) once again stepped up and hosted the 5th Annual Canadian SHOT Show Reception, with the support of the Canadian Sporting Arms and Ammunition Association (CSAAA). This event has literally blossomed from a dozen people gathered in a hotel room, to a huge event that draws in Canadians from every aspect of the firearms community. Hosted at the Stratosphere Casino, Hotel & Tower, the event was held towering above the city of Las Vegas 108 stories in the air. The view was incomparable, the food was great but extremely short-lived, and the casual atmosphere allowed for the Canadian contingent of SHOT Show attendees to unwind a bit and relax and talk to other Canadians about anything including shop talk. This past event hosted in excess of 300 individuals that otherwise rarely, if ever, communicate to each other except through emails and phone calls. However this reception in its current state is only possible through the sponsorship of multiple firearms related businesses and individuals. TPF would like to personally thank each of these for their support and will list each and every one here.
Platinum:
Canadian Shooting Sports Association
Canadian Sporting Arms and Ammunition Association
North Sylva Co.
Trigger Wholesale Inc.
Calgary Shooting Centre
Federal Ammunition
Gold:
Calibre Magazine
ThinkInsure!
Stoeger Canada
Silver:
T.E.C. Trade Ex Canada
Nordic Marksmen Inc.
CamPro
Bronze:
Tactical Ordinance Inc.
Shooters Choice
Wolverine Supplies
Double Tap Sports
Holosun Technologies Inc.
XMetal Targets
Outdoor Canada
Firearms Legal Defence
WGT Consulting
Vault Distribution
Korth Group Ltd.
Bowmac Gunpar
Browning Canada
Hudson Supplies
Thanks to these sponsors for making the Canadian SHOT Show Reception possible and for being a part of the event. Here at TPF we will be sure to visit each of the sponsors and look at what they have to offer to our Canadian firearms community. We hope that you would do so as well.
As preparations have already begun for next year’s 41st SHOT Show, which will return to the Sands Expo on January 22-25, 2019; so to have the preparations for the 6th Annual Canadian SHOT Show Reception. Companies and potential attendees are asked to contact CSSA Director Mike Duynhoven.
As a FYI to readers who are not Canadian, or are not familiar with our listed organizations; the CSSA is similar to the USA’s National Rifle Association, only more polite eh? They are the organization that represents the firearms consumers across Canada with training, and political outreach; but only have two decades under their belt compared to the NRA’s 150. The CSAAA represents the Canadian firearms industry and looks after their interests, similar to the National Shooting Sports Foundation which organizes and runs the SHOT Show.
Here is a few images showing some of our Canadian companies that are exhibiting at SHOT Show! Make sure to visit ALL of them and help them all out.
A decade of producing high efficiency LED products, located in East Ontario
Kitchener, Ontario based manufacturer that has helped harvesting game for 35 years
Based in Quebec, this 30+ year old manufacturers tough protective cases
CamPro harkens from Quebec with over 2 decades of manufacturing some of the best plated projectiles available
Canadian distributor of some truly fine optics for the last 15 years. Guelph, Ontario
Over three decades of providing reliable speed chronographs to the Canadian market and worldwide. Mississauga, Ontario
Canadians created the loudest, most impressive binary explosive. Manufactured by Gryphon Energetics out of Winnipeg, Manitoba
Firearms distributor for nearly 20 years, based out of New Westminster, British Columbia
This Toronto, Ontario based firearms importer is one of the youngest with just under ten years in existence
There are currently over 30 Canadian companies that exhibit at SHOT Show with more and more doing so every following year. We at TPF will strive to get you a list and images of every single one of our Canadian exhibitors next year at SHOT Show 2019. Thank you for reading all the way through this small write-up of the 2018 SHOT Show. We will soon have more reviews and look forwards to future events for 2018.
Fun Fact: Canada, while only a tenth of the population of the USA, has a substantial number of legal firearms owners. For every 1000 firearms made in the USA, 95% of those remain in the USA for domestic sales, Canadian markets account for 80-90% of the those exported from the USA. That means out of every 500 firearms exported from US manufacturers, Canadian markets get 400-450 of those. This is the reason that most firearms manufactured have a slightly longer barrel to meet Canadian Restricted status instead of Prohibited, such as Ruger GP-100 is 108mm (4.2″) in length.
A complicated name for a small EDC knife
In this installment of TPF, readers will be able to look at an offering by SOG which is a manual opening knife that incorporates SOG’s patented Arc-Lock system. If the title seems somewhat confusing, please do not stop reading as, despite having a long model designation, this blade does have several items that are worthy of being showcased. TPF is pleased to introduce readers to SOG’s Folding Knife Mini X-Ray Vision. This has a distinction of having a very wordy designation for such a small simple knife design that it almost seems out of place.
Off the shelf, the knife being looked at in today’s installment.
This knife initially appears to be one of the more basic folders offered by SOG that would be a very capable addition to anyone’s EDC (Every Day Carry) option. This knife has a combo-edge tanto blade that measures 76mm (3.0″) with some two-step serrations, one large followed by two small; repeat. The knife itself is extremely light, massing in at roughly 85gr (3.0 oz), mainly due to the glass reinforced nylon handles that surround the liners.
We here at TPF obviously love the description of this knife on the SOG website. As it resonates with the majority of our tag line.
Two words that best describe the X-Ray Vision series are “tactical” and “practical”.
But is it too fantastical for some? Some aspects may be…
The three Torx screws form the pivot, blade stop, and the Arc-Lock swing pivot
As stated earlier, this knife is a manual opening knife. Manipulating the ambidextrous thumb is the primary method for blade deployment. The Arc-Lock system on the Mini-X-Ray Vision is a spring-loaded, pivoting bar that retains the blade in a closed position with minor spring force. When deploying the blade, the Arc-Lock shifts along the internal profile of the blade until fully deployed, at which time the pivot bar “locks” into a corresponding notch on the profile. The spring is the key feature for the locking mechanism, and if closed, pulling back on the Arc-Lock bar actually begins deployment of the blade. This allows for a “friction-free” deployment of the blade. However, holding the Arc-Lock bar back prevents the blade from locking open.
The two halves of the knife are held together by a quintet of Torx socket, pan head screws with the opposite side appearing as a blind rivet head. The Arc-Lock bar, and thumb studs are a two piece slotted assembly, with only the thumb stud having an exposed thread on the nut side. With the blade in the closed position the knife measures exactly 101.6mm (4.0″) to the end of the pocket clip, and when fully open the overall length stretches to a hair above 178mm (7.0″). Which will bring TPF Online to the only obvious aesthetic error that we can identify…
The reversible pocket clip that allows for left or right side, tip up carry
The countersunk flat head philips screw which is used to secure the pocket clip into position seems out of place. Using a Torx socket version would have kept up the visual appearance across the entire knife, but in the grand scheme of this knife, this is a very minor quibble. The pocket clip has a fairly large mouth and can be mounted to allow the knife to be worn on either a left or right side, tip up carry.
The lines of this knife are crisp and clean with minimal distractions, such as patterned and ornate contoured handles. The simple handle design incorporates a single pronounced finger groove. Combine that with the serrated thumb rise on the blade and the ability to control the blade for a variety of grips and uses is apparent. The pivot of this knife is very smooth, however the teflon washers do allow for a slight amount of blade play side to side.
Showing off the matte finish of the partially serrated tanto blade
The blade itself is manufactured from VG-10 steel, with a thickness of 2.5mm (0.10″) and has a bead blasted finish. This steel is normally considered to be a higher end steel that has good qualities regarding corrosion resistance, edge retention, and sharpening ability.
Profile image showing the blade length
Showing the overall length when folded
The Mini X-Ray Vision, SOG Model #MXV72-CP, is a very lightweight manual folding knive with a higher quality steel blade. Readers may recall earlier in this write-up we commented on the possible fantastical aspect of this knife. The suggested MSRP of the knife as reviewed is $161.50 USD, but readers can find it at a much more affordable price point at various online outlets across Canada, such as Blades Canada Cutlery Corp., who have a storefront in Vancouver BC. As an EDC knife, this edged tool has all the required options for being a good EDC, possibly excluding the price tag. However, as per the norm for here, it is up to you, our readers, to determine if SOG’s Mini X-Ray Vision falls under the heading of Tactical, Practical, or Fantastical.
Screwdriver not handy as a pry-bar? Don’t use your knife… Unless..
One of the most abused parts of a knife is the point or tip of the knife. Users jab it into seams and use the blade as a makeshift wedge or pry-bar in order to crack open or split whatever they are working on at the time. The problem is that the tip of the knife is the weakest part.
The prying puts large tangential stress into a small focused area on what is traditionally the thinner parts of a knife. Now, several knives try and offset this by making a blunt tip which increases the area used for prying that distributes the fores better. Others increase the blade thickness to have a stronger tip that can suffer greater levels of stress before breaking. Columbia River Knife and Tool had a slightly different take which makes a bit more sense to the author. Enter the Barge.
The Barge adds a huge chunk of metal to the end of this folder
Kershaw’s Barge is a very simple and rugged designed knife that has basically two purposes. Cutting stuff and being used as a wedge/prying tool. The knife is not really that small, amassing just over 150g (5.4oz) and measuring 119mm (4.75″) in length when closed. The first thing you notice looking at the knife however, is the huge metal cap on the knife’s butt end. That is the key of the Barge, the wedge shaped butt cap, and it is massive and mounted very securely between the liners. The wedge acts as the spacer between the two liner halves of the knife. It is secured by five (5) screws along the back and rear edges of the handles, these are not small screws either, they are massive compared to those typically used on folding knives. Of interesting note of this design is the fact that the majority of the screws/nuts use a T8 torx driver for assembly/disassembly, with two exceptions. The reversible pocket clip allows for both left and right handed, tip-up carry, and is secured by a pair of T6 torx pan head screws. The second exception is the most obvious and greatest departure from the other fasteners used, as the large pair of slotted screws provide the main strength that binds the handle to the wedge. The wedge also has a lanyard opening for those who desire to use them.
The opposite side shows off the five (5) screws that hold the large wedge in place
From the Kershaw Website:
- Multifunction – Has multiple blades or tools, enabling it to perform multiple functions.
- Manual – There is no mechanical assist, such as SpeedSafe, used to open the folding knife. It opens the classic, old-school way.
- Frame Lock – A portion of the handle (the knife frame) moves behind the blade to lock it into position during use. This is a safety feature of the knife.
- Reversible – Pre-drilled holes in the handle enable the user to change either the tip position or the side on which the knife carries.
You can easily make out the closed retention ball on the frame lock and the corresponding hole in the blade
As is typical in many frame lock knives that are manual in opening, there is a small bearing that is press fit into the locking arm and a corresponding dimple/hole in the blade that enable securing the blade into a closed position. This does equate to a very slight increase of required pressure when opening these knives, but it is almost negligible when using the thumbstuds to open the 6.6cm (2.6″) edge. Now speaking about edges, the Barge’s plain blade has a slight hollow gound edge whose profile is a combination of a warncliffe edge with the spine of a typical drop point and incorporates a slight upward curve close to the tip. Manufactured from 8Cr13MoV, the blade is easily sharpened, and the blade itself, the frame halves, and the wedge have been given a stonewash finish which gives a soft, metallic appearance.
With dual serrated areas along the spine, a multiple of grips can be utilized for a variety of tasks
The overall length of the wedge insert is 66mm (2.6″) and is scalloped to allow for the knife’s blade to easily fold up while creating a very robust assembly. The steel right frame panel is 2.4mm (0.095″) thick and incorporates the frame lock mechanism, whereas the the left panel is slightly thinner at 2.0mm (0.08″). However a black textured nylon panel completes the left side for added grip. The blade is 3.1mm (1/8″) thick and uses nylon washers for stiffness and rigidity at the pivot point. The Barge measures 12.1cm (4.74″) long when closed and 18.4cm (7.24″) when locked open which belies the 146.8grams (5.18oz) that this hefty tool masses. The wedge of course is a large contributing factor in those numbers, and with a 1.7mm (0.67″) thick flat edge that is 10.0mm (0.40″) long, the “screwdriver” tip of the Barge is ready for some of the worse pry jobs most people can imagine.
Mass and a large, long grip with a short blade equals good blade control
Thumb serrations for and aft of the thumb stud on the hollow ground blade
The Kershaw Barge, model 1945, is a very utility oriented knife that could be a good addition to an individual’s every day carry inventory. With a noticeable mass and good control surfaces, this offering may seem cheap at the MSRP of $48.99 CDN, and can be found in stores such as House of Knives. As always however, the question is what category the Barge falls into for you, the reader? Tactial? Practical? Or Fantastical?
Is it a good choice for just shy of $50 CDN? You need to be the judge…
Designed by a Canuck! This knife is keenly sharp in function, looks and edge!
Mr. Tighe (circa 2013 image)
For those readers whom are not into knives at all, you can be excused for not knowing who Mr. Brian Tighe (pronounced “Tie”) is. If you are an “edge enthusiast”, you may be familiar with the name. With South Eastern Ontario being called home, Brian Tighe has been making custom knifes for a couple decades and his tool and die experience shows in the manufacturing of his wares. His additional design and photography background serve him well in determining physical aesthetics and what shapes and styles are visually appealing.
As with most knife makers who collaborate with “Mass Production” knife companies, it is a normal occurrence to have an custom knife design adopted and using cheaper materials and processes to create a commercially available knife for the masses. Tighe has created numerous designs over the years that have been adopted into large scale production by Columbia River Knife and Tool (CRKT) and one of the latest ones is the Tighe Rade™ (pronounced “Tie-Raid”). Obviously with the original custom Rade design retailing at over $500 USD it is far away from the casual user and low end collector of knives.
The custom made Tighe-Ride is a truly beautiful custom knife
From the CRKT website:
In hand or in action, this is one to show off.
Brian Tighe doesn’t know how to do anything subtle. Case in point: his latest everyday carry folding knife with a button lock screams style. The aluminum handle features contoured, textured grooves. A compound ground blade deploys swiftly with a flipper and IKBS™ or ambidextrous dual thumb studs. About the only thing it doesn’t do well is sit idly; it’s apt to go on a tirade.
Designer Brian Tighe of Ridgeville, Ontario, Canada, upped the ante when he created the Tighe Rade™. From tip to tail this one-of-a-kind, high-tech folder boasts looks that seem more at home on a fighter jet than a knife. It’s a welcomed new addition to the impressive line of award-winning knives that Tighe has become so well known for designing.
The tip is ground and reinforced for stronger cutting applications, while closer to the handle it’s perfect for finer cutting tasks and wire stripping. And with its highly stylized aluminum handle and multiple usage blade, the Tighe Rade™ is packed with substance and style. The unique design maximizes overall performance and ease of sharpening, and the easy to operate and disengage button lock keeps everything secure while it’s open.
The sophisticated and modern Tighe Rade™ is one part smooth operator mixed with one part showpiece.
Some readers may wonder how, and why, the CRKT version is so much cheaper than the original. First off, the custom basic Tighe-Rade™ has solid titanium scales (left and right sides of the grip/handle), incorporates an exceptional sealed thrust bearing pivot, and the blades are manufactured from some of the highest quality steel available. CRKT takes the original contours and makes them more economical to produce. The scales are molded and machined from aluminum and mounted on steel liners, plus a simpler and cheaper pivot is used, and the blade steel itself is modified to give acceptable mechanical characteristics at a more cost effective price. Most individuals whom are known as “edge enthusiasts” to the author, do not carry a custom knife for EDC due to the costs, and while there are some who do, they would be the exception to the norm.
CRKT ‘s clone has the same shapes and functions, albeit at a more wallet friendly price
The Rade™ features many inclusions not found on most folding knives, and these features give a level of aesthetic grace and functionality that is desired by many knife users. The blade is of a very slight drop point profile with a slightly recurved belly and features a dual ground edge. The dual ground edge is not a combination/hybrid single edge, but two portions of the blade’s edge with differing grinds. For the first 52.5mm (2.06″) of the blade’s 85.3mm (3.36″) overall length, a standard flat ground edge is apparent. From that point and continuing an additional 29.1mm (1.14″) towards the pivot is a hollow ground edge area. The visual effect is obvious and striking aesthetically; however despite the 3.2mm (0.12″) spine thickness, the hollow ground portion will likely effect the overall blade strength so the author cannot recommend utilizing the Rade™ for prying.
The dual ground edge gives a distinctive look and is sharp!
The blade itself is manufactured from 8Cr13MoV stainless steel and pivots around caged ball bearings which are tensioned between a pair of sculpted torx socket pivot heads. The handle of the knife measures 115.1mm (4.53″) in length, and is comprised of the 2Cr13MoV stainless steel liners and the 6061-T6 aluminum scales. The resulting opened length of this knife is approximately 200.0mm (7.88″) and barely tips the scales with a mass of 125gr (4.4 oz). Opening the knife is through use of the flipper tab or the ambidextrous thumb studs and the blade is secured in the open position via a button lock system.
A visually similar, mass production version of the custom Tighe-Tade
While very robust; right side, tip-up is the only available carry option
The aluminum scales on this knife have an aggressive contour and machining which results in a coarse grip pattern, but the handle itself is scalloped for an individual’s fingers and hand. The author’s hand is rather tight inside the 87.6mm (3.45″) opening, but not unexpected having fingers the size of sausages. However grip is secure and the chances of slipping forwards is next to zero. The pocket clip, unfortunately, has a only the single mounting position opposite of the button lock. This results in a tip up carry position for common right side pocket placement. The button’s spring loaded nature actually help to retain the blade in the closed position due to pressure exerted on the blade. This resistance and the mechanical design of the flipper, make inadvertent opening of the knife a low possibility.
The Tighe Rade™ from CRKT, model number 5290; has an MSRP of $69.99 USD. This knife can be found among Canadian retailers such as at Supply Seargent, located at West Edmonton Mall. One question still remains however, is CRKT’s Tighe Rade™ a Practical knife, a Tactical knife, or a Fantastical knife? That answer is only something you, the reader, can decide.
While not manufactured with the care and quality of the originals, these clones are still decent knives
Battered from field use, the Ultimate is revisited…
After several trips to the bush, the Ultimate looks relatively unchanged on the outside
Roughly a year ago, TPF Online wrote an installment on a Gerber/Bear Grylls collaboration called the Ultimate Survival Knife. The knife itself caught the interest of one of the author’s more adventurous friends and he acquired it. What many reader may not realize is that in some cases, product images and information is created long before a review is written. After over a year of abuse in the back country of Ontario, Mr. Jody Hammel submitted this review of the knife.
GERBER/BEAR GRYLLS ULTIMATE SURVIVAL KNIFE
Hammer, splitting wedge, fire starter. About the only part not used was the whistle…
I had seen and acquired the Ultimate Survival Knife back in early September 2013, having had to wait for TPF to finish photos and gathering information on it, before handing it over to me. I have since been using this knife as my main camp knife when in the back woods of Algonquin Park which I frequent several times a year. In general the blade feels solid in construction. The blade itself is 3/8” thick at its base where it meets the handle. After 3″, it begins to taper to the tip point and has an overall blade length of just less than 5”. The rubberized handle has a nice grip that does not slip in your hand when it is wet. The index finger grove is nice for added stability. The pommel appears to be made to the same metal as the blade and is perfect for driving in tent stakes or cracking open stubborn walnuts. I have bashed a few things with this and it doesn’t show any wear and tear. I have yet to try the whistle on the lanyard.
Used for several fires, the ferrocerium rod was wearing fast, but stayed secure in the sheath
The Ferrocerium fire starter rod that is built into the sheath came in handy one night as my lighter was hung 40 feet up a tree with the rest of the cooking gear. We had no issues using the rod and the back of the knife’s blade to get the fire started. While I was concerned that the striker rod may come lose and get lost, it never
I did use the blade for some bush whacking to clear trail to where our food and cooking gear was hung. The front of the blade was fine but the serrated section did not fare too well. This is no great loss to me as I was not a fan of the serrated part any way.
Abused as a mini-machete, the serrated edge suffered
Took a licking and continues to ask for more
My only complaint is not with the knife itself but with the sheath. I find that it sits too high on my belt and the squared off corners would either dig into my side or scrape against it. It would be nice if the entire knife and sheath hung a little lower to avoid this issue or if the sheath’s corners were rounded. The rest of the sheath is good and the knife sits snug and won’t easily fall out even with the Velcro clasp undone. The fire rod does hang upside down but again is a snug fit and I have never had it fall out by accident. On the back there is a knife sharpening flat that I have had no use for as the knife has kept its edge. The serration edge would require a specialized sharpener to re-edge the tips of the serrations, but not too worried about it.
Over all it is a good all around knife. I used it to whittle tent stakes out of branches with and then drive them into the ground. The blade is beefy enough than I can use it to split larger branches by hitting it with another log and have no fear of breaking the blade. I also like the orange colouring but that’s just personal.
I never needed the whistle or the SOS instructions attached to the knife and sheath, so cannot really comment on those features.
Pros
• Feels good in the hand (I have long fingers).
• Blade keeps an edge.
• Solid construction.
• Colouring helps locate if dropped.
• Fits snug in the case.
Cons
• Sheath rides to high on the belt causing discomfort.
The only complaint is the sharp, hard square corners of the sheath
Many Thanks to Mr. Hammel for his time and efforts in getting back to TPF-Online and writing this review after many months of usage and abuse while adventuring in the regions of Algonquin Park.
The ultimate knife? TPF lets you know who thinks so!
Edward Michael Grylls.
The Ultimate Knife
Many of our readers may not recognize that name, but if TPF were to mention “Bear” Grylls, you may recall that he is the United Kingdom’s version of Les Stroud, and a worldwide adventurer! In truth, if you are a long time reader of TPF, you would have known about this person from previously reviewed products. In this installment of TPF, yet another Gerber/Grylls collaboration was done on what is titled the “Ultimate Knife”. As always however, we here at TPF will give you the facts and details and leave the decisions to you, the readers.
Thes are the components of what the Ultimate Knife contains:
Knife, Sheath, Fire-starter, Survival guide
The Ultimate Knife is supposedly the only knife you would need in a survival/adventuring excursion. The knife and sheath come with a myriad of features and requirements that would provide many basic necessities for outdoor use. Gerber Legendary Blades has a whole realm of Grylls’ survival equipment available, but of course there is never enough space to describe everything.
A signal whistle is attached to the knife’s “Hammer” via a lanyard
Contained within the 254mm (10.0″) overall length of the knife is a 122mm (4.8″) drop point blade. This half serrated, hollow ground blade is manufactured from 7Cr17Mov Stainless Steel which allows for good edge retention and extreme ease of cutting rope when required. The blade’s serrations start from the choil of the blade and run approximately 47.5mm (1.875″) in length and with a spine thickness of 4.8mm (0.19″) this knife is fairly robust and meaty by massing 318 grams (11.2 oz).
The handle is manufactured from an orange coloured polymer and is embedded with TacHide™ rubber to ensure a secure and comfortable grip on the knife when in use. Add to that a hammer/pommel measuring 32.4mm x 21.5mm (1.28″ x 0.85″) to the hilt of the knife and it becomes easier to see why Gerber and Bear claim this is the ultimate outdoor knife.
The TacHide grip is very comfortable
There are actually even more features of the knife which are included for additional survival requirements. On the back edge of the knife spine, is a 19mm (0.75″) section which is machined down as a striker for the fire-starter, to be mentioned later in this review. As well are three through holes measuring 4.9mm (0.195″) in diameter, two of which are at the front edge of the guard and one in the pommel. These three holes are present for if and when the user wishes to mount the knife on a shaft for a spear. An emergency whistle is integrated into a lanyard cord which is threaded through the pommel’s hole, but it is the sheath and all it’s features which add to the collective exuberance of features in the whole package.
Attached to the polymer sheath is a diamond grit sharpener
The sheath and secured knife mass a total of 418 grams (14.7 oz) and measure 278mm (10.9″) overall in length when worn. The knife retaining portion of the sheath is manufactured from a injection molded polymer which houses the fire-starter. This fire-starter is a Ferrocerium rod which is embedded into a small plastic handle that snaps into a specific area on the polymer sheath. By striking.scraping the fire-starter against the “striker” located on the knife’s spine, the user can generate high temperature sparks and ultimately fire which is always a great benefit to those who adventure outdoors. The remainder of the sheath is manufactured from ballistic black nylon and contains additional items of interest. The nylon sheath has two (2) Velcro straps on it. The first one is to secure the knife’s handle more fully when fully sheathed, and the second strap holds the plastic knife sheath portion against the nylon sheath backing. The first question to pop into your mind may be why bother? Mounted to the backside of the plastic sheath is a diamond grit sharpening insert of sufficient size to resharpen the knife’s plain edge.
With vertical and horizontal belt mounting, the small slide-in pocket on the back also has signal instructions.
With survival in mind, the mildew resistant sheath has two more features to help the adventuring outdoorsman. The first is a sewn in pocket which depicts various land to air rescue instructions and signals. This pocket also contains a tightly folded, water resistant, basic survival guide which contains Bear Grylls’ survival essentials. The sheath can be worn two orientations, the tradition hanging belt loop orientation, plus the sheath has two additional loops which allow for a horizontal wearing. For the second method, it is likely that the handle Velcro strap would not be used for additional securing of the blade.
The “Ultimate Knife” as reviewed, was released in late 2010 by Gerber Legendary Blades under product number #31-000751, and is still available to this day at an MSRP of $62.00USD. It can be found all across Canada both online and at real storefront locations such as Wholesale Sports, located in Winnipeg, Manitoba. So depending on your requirements, how would you class this “Ultimate Knife”? Tactical? Practical? Or fantastical?
Everything stowed away and ready for the next outdoor adventure!
Additional Notes: there are newer options for the Ultimate Knife such as a pure fine edged blade instead of the partially serrated one, as well as a Pro version which uses a higher quality and denser steel for it’s plain edge.
Ken Onion’s Skinner – Developed through experience with excellence being the goal.
A thick spine for substantial strength…. This blade is a Ken Onion masterpiece…
For many of you who have zero clue who Ken Onion is regarding knives, don’t be too ashamed. Until a couple years ago, the name would have been completely unknown to the author as well. For now TPF will give some background on one of the most innovative and dedicated knife designers/fabricators that has plied his trade in North America for just over the last three decades.
Born in the early 1960’s, Kenneth J. Onion has stated that he has always being interested in knives, yet it was not until 1991 when under the tutelage of a local knife maker, Stanley Fujisaka, that Ken Onion made and completed his first knife. Since then however, Ken Onion has dove into the knife making world head first. In 1996 Ken Onion designed and created a spring assisted opening mechanism, and by 1998 the “Speed Safe” SAO system had been adopted by Kershaw Knives, and Ken Onion was directly working with Kershaw. Many of Kershaws successful designs were from Mr. Onion’s efforts and for the most part associated Ken Onion with Kershaw as the two were nearly interchangeable. Nearly two decades after his first “custom knife”, Ken Onion left Kershaw and created his own company, and partnered up with CRKT back in 2010. With more than several dozen knife related patents to his name and the knowledge and experience to create new designs, you can be sure that as long as Ken Onion decides to continue designing and making knives, they will always be top notch in effect.
In 2011, CRKT teamed up with Ken Onion to mass produce “THE Skinner”. Not just a common “hunting knife” but one whose design started several years earlier and was the result of numerous revisions and several dozen field trials. Here is the quote from CRKT’s website regarding the Skinner:
Hawaiian knife maker Ken Onion told us he was working on the ultimate hunting knife, but it wasn’t ready yet. We assumed that he meant he was putting the finishing touches on a prototype, and were we wrong!
Instead, Ken was concluding an extensive field testing program spanning more than five years, making dozens of custom skinners and giving them to Alaskan guides, professional hunters, and taxidermists in exchange for their feedback. He kept modifying the design and sending out more knives, which have now been used to skin over 60 Alaskan bears, and have been proven on deer, elk, moose, antelope, hogs, sheep and cattle.
Compact with a nice pancake sheath and lanyard, what does Ken Onion’s Skinner look like?
CRKT’s Skinner is designed to be an exceptionally versatile hunter’s tool. The 95mm (3.8″) blade has spine thickness of nearly 3.6mm (0.14″) and is cut from Böhler K110 steel. The blade is a variation of the drop-point profile which really allows for the plain hollow grind edge to be relatively large and flat while seeming to have a large belly (which it does not). Amassing 105 grams (3.7 oz) across it’s 203mm (8.0″) overall length, the Skinner is not a overtly heavy blade for carrying around. The tang of the Sninner is only 3/4 length opposed to a full tang setup. The grip consists of several components which are seamlessly moulded together, primarily the Zytel core and the soft thermoplastic rubber (TPR) outer covering which enhances the “scales” of the grip.
The Skinner is the result of numerous years of prototypes and enhancing from user comments and critiques.
For control-ability a large choil is inset into the grip shape allowing for refined control. In addition, the large blade allows for the user to have ample thumb room for strong and deft manipulation of the cutting edge which is imperative for skinning. With the attached lanyard for retention, the Skinner allows for continuous, at-ready use.
The blade profile has a large belly and is exceptionally wide
The sheath of Ken Onion’s Skinner blade is remarkable in itself. Manufactured similarly to pancake holsters, the sheath is profiled to carry the Skinner on a forward sweeping angle. Crafted from 6 ounce leather and treated to be black in appearance, the sheath masses roughly one third of the blade itself at 60 grams (3.7 oz). The sheath incorporates a profile contoured shape which results in an exceptionally good securing method for the blade. Designed for ambidextrous wearing, the sheath is equally at home for both right and left handed users and the angled design means a more comfortable fit when the knife is sheathed.
Ken Onion’s Skinner has a simple soft grip that is more secure than it looks
The Ken Onion designed Skinner knife is manufactured by CRKT under the model code K700KXP and has an MSRP of $89.99 USD. It is available for purchase from retailers such as MilArm Co. Ltd. located in Edmonton, Alberta. Is this knife design Tactical, Practical, or Fantastical? That is for you, the reader, to decide.
An interesting take on an EDC multi-Tool. Is it all you truly need?
Sometimes a product comes around that defies TPF’s standard conceptual understanding of what that product’s generic style should entail or encompass. It is a very rare event however. Yet Kershaw knives has done exactly that with their off beat multi-tool, the Select Fire.
Select-Fire multi-tool
Kershaw Knives are not unknown to many readers, but there are a few who have never heard of this company. Kershaw Knives was founded in 1974 in Portland, Oregon when knife salesman Pete Kershaw started a cutlery company that would make knives from his designs. Those designs were manufactured by Japanese based KAI Cutlery. In 1978, KAI Cutlery purchased Kershaw Knives and the overall company was renamed KAI USA Ltd. KAI USA continues today with three product lines; including the original Kershaw Knives and Shun Cutlery which primarily markets kitchen cutlery. Fast forward to 1998, and after nearly 25 years of knife design and manufacturing, Mister Pete Kershaw, then company president, retired with a corporate legacy of good quality products for value and a superb customer service program, which continue to this day.
Most common every day carry multi-tools are based primarily around a set of pliers with accessory tools and blades as secondary components of the tool. In this EDC product there are simply two tool arms with a couple additional features added in. If one was to ask what is comparable to this product, the first idea that popped into the author’s mind was an older, simple swiss-army tool. What makes it similar to that well-known and house-hold description? The first thing that is noticeable about the Kershaw Select Fire is that is first and foremost a folding knife with some additional tools added in for when they are required. This is where the difference in EDC multi-tool design philosophy is apparent. Is it more desirable to have a dedicated tool with a blade being secondary, or is a blade the primarily used part and other items are secondary.
Kershaw’s Select-Fire is a knife first and foremost, but it does have some extra features
Smooth design and blade secured via a liner-lock
As stated, the Select Fire is designed around a 86.0mm (3-3/8″) spear-point profile blade. Manufactured from 8Cr13MoV steel and having a satin finish, the non-serrated blade incorporates both a slight hollow grind and re-curve edge in its design. Mounted in the 3.1mm (1/8″) wide spine are a pair of opposed thumb studs for ambidextrous opening. The blade itself is nestled between a set of steel liners, one of which has the liner locking mechanism for ensuring a securely extended position. The glass-filled nylon panels are moulded in black with a fish bone shaped pattern on them. Secured to the liners via a series of hex socket rounded head screws on each side, the panels are comfortable even when using the secondary tool arm of the Select Fire.
The secondary tool in this design is an extendable 6.4mm (1/4″) hex bit driver which has three positions retained by a small spring-loaded bar. Available are the closed, 90° (half) and 180° (full) extended positions. Roughly 64.0mm (2-1/2″) in length, the bit driver turns the multi-tool into a true screwdriver with minimal profile changes to the main handle of the Select Fire. The author has not tested the durability of the driver arm, but the main shaft is rectangular in section 3.1mm x 4.8mm (1/8″ x 3/16″) and seems to be very sturdy. Like most bit drivers however, the usefulness is limited without the actual drive bits themselves. This is where the design of the Select Fire takes a turn to modern methods and ideas.
Pre-loaded with four bits, the Select-Fire is innovative in it’s bit storage and in turn it’s construction
Bit driver fully deployed
Most multi-tools which have some sort of screwdriver tool arm have very short malformed driver heads and are very hard to manage as a useful screwdrivers. For those multi-tools that incorporate a bit driver attachment, the actual bits are sometimes miniaturized and/or proprietary and once lost are expensive to replace. The other multi-tools which use full-sized bits have an additional pouches, sleeves, or external holders to ensure that your bits are nearby when you want them. The Select Fire solves the storage problem in a simple and ingenious method. It stores full-sized driver bits in the handle, two per side. A cutout in the liners and grip panels serves as the home to a small, spring-loaded, bit holder on each side. Each bit holder holds two bits between three “fingers” which incorporate the hexagonal shape of the bit shanks themselves. The Spring loaded holders snap back into storage position, which does not allow a full size bit to fall out of the holder due to the limits of the aforementioned cutouts in the liner and grip panels. The Select Fire comes pre-loaded with #5 and #7 straight-style bits, and PH1 and PH2 Philip head bits. However, the true benefit of the use of full-sized bits is that the end-user can replace them with anything which is more commonly used such as red #2 Robertson or such.
Spring loaded to retract into the handle, the storage arms keep bit handy and immediately nearby
These are the primary and secondary tool components of the Select Fire multi-tool. A large dedicated blade and a dedicated bit driver. The design does incorporate a couple tertiary design features which, in the author’s opinion, are more akin to small design quirks to add to tool count. These are a small ruler on the bit driver arm, and the bottle opener which is incorporated into the recess for the bit driver and requires the driver be extended before usage in both cases. The Select Fire has a reversible pocket clip which allows it to be worn in the tip-down position. Considering the overall closed size of 108.0mm (4-1/4″) and mass of only 152 grams (4.8oz), the Select Fire is a very easy addition as an EDC for anyone who prefers this style of multi-tool. Blade focus versus plier focus.
Overall it is well made and, as per most Kershaw products, has a good design and quality for the price. The ONLY detraction the author has is the slight chance that the bit holder springs may protrude just enough to snag on finer materials, but the Select Fire isn’t meant for dressy occasions, so that sort of event may never occur.
Kershaw Knive’s Select Fire, model #1920, has an MSRP of $34.95 USD and can be obtained from retailers such as Gorilla Surplus, located at 1458 Broadway E., Vancouver, BC. Like every product reviewed by TPF-Online, it is up to you the reader to decide if the Select Fire is Tactical, Practical, or Fantastical…
The personal shield to help protect, according to SOG Knives
SOG’s Aegis
SOG speciality Tools and Knives is renowned for their geared plier-based multi-tools, but as per previous installments of TPF-Online, they also manufacture some quality and interesting blades. With that being said, SOG gratefully provided TPF-Online with one of the Aegis line of knives for reviewing. For those that may wonder where the word Aegis comes from, let us take a bit of a history lesson from Wikipedia.
An aegis is a large collar or cape worn in ancient times to display the protection provided by a high religious authority or the holder of a protective shield signifying the same, such as a bag-like garment that contained a shield. Sometimes the garment and the shield are merged, with a small version of the shield appearing on the garment. It originally was derived from the protective shield associated with a religious figure when related in myths and images. The wearing of the aegis and its contents show sponsorship, protection, or authority derived from yet a higher source or deity. The name has been extended to many other entities, and the concept of a protective shield is found in other mythologies, while its form varies across sources.
The Aegis has a slimmer handle than the similar Flash-II. Both are SAO knives but there are some subtle differences between the two
The word Aegis has traditionally been used in defensive systems and designs across the world, from protective sunglasses to 1911 style handguns to ship based missile systems. It is in this vein of thought that SOG has adopted the name’s usage for an ultralight folding knife series. Based upon the patented SOG Assist Technology™, and the Arc-Lock system, the Aegis is very similar to the previously reviewed Flash-II in opening, locking, and safety mechanisms. TPF-Online takes a look at the AE-04 model of the Aegis series of knives.
The Aegis handle has no steel liners securing the blade malking for a lighter design
The initial thought of the author when the Aegis was first looked at was that the handle looked cheap with a bland matte black finish and very minimal patterning for grip retention. Simply put however, the author was wrong. The black handle of the knife is manufactured from Zytel nylon and is composed of 2 halves secured together with six (6) socket head screws. Four (4) along the back spine of the handle, one (1) for the pocket clip, and final fastener as part of the SAT/pivot. The partially serrated tanto blade measures 89.0 mm (3.50″) in length and inserted into the blades spine are the ambidextrous thumb studs. The titanium nitride coated AUS-8 steel blade sports nearly 28.0 mm (1.10″) of thumb ridges along it’s 3.0 (0.12″) thick spine.
Showing off Gerber’s Serration pattern
The Aegis handle does differ from the Flash and it is these differences which externally show up between the two designs. The profile of the Aegis removes any excess thickness and width which was present on the Flash-II’s, such as the removal of the lanyard loop hole, two finger profile in the grip, and the small hump at the top of the handle above the pivot. The mass saved is offset by the tanto-blade profile which, while massing the same 97 grams (3.1 oz) as the Flash-II, results in the Aegis having a centre of gravity further forward than the Flash-II.
In the grips are a series of rubberized inserts sporting the SOG brand name repeatedly while proving a surer gripping ability for the individual whom wields the knife. The manual safety on the left side of the grips and prevents the Arc-Lock system from moving the locking piston when in safe position. Since the piston lock also provides direct resistance for initial blade opening, by engaging the safety the piston is rendered immobile and therefore disables opening of the blade. Add into that the reversible pocket clip for tip-up carrying, and the Aegis package is complete. While SOG promotes this product as a tactical knife, the low mass and efficient blade design make the Aegis a good EDC knife for those interested.
Just above the rubber grip inserts, the safety of the Aegis shows that the blade is deployable
The SOG Aegis reviewed (AE-04) has a MSRP of $114.00 USD and is one of many variations available for the Aegis line of blades. Remember that the SOG AE-04 Aegis Folding Knife, like all SOG products, is backed by a lifetime warranty that protects against defects in manufacturing and materials. This knife can be found as various stores across Canada and online at places such as Toronto based www.thegreatoutdoorsmen.ca. TPF-Online authors have their own opinion of the Aegis folding knife, but ultimately it is your decision, the reader’s, to determine if SOG’s Aegis folding knife is Tactical, Practical, or Fantastical.
Beefier than an M16, the M21 is a formidable piece for anyone to carry.
Everyone most likely knows at least one other person who has the ability to narrate extremely well and has ability to draw a listener completely into a story they retell. How many plant the hook and slowly reel in the listener, who is captivated by the idea, and then surprise them as the entire story was about something completely different from what was originally believed? Here at TPF, we were offered a chance to test out a bigger brother to the M16. That was when TPF was provided an M21 to review. Suffice to say that the excitement level at TPF was excellent and when the M21 finally came from Columbia River Knife and Tool we were extremely pleased. The author wonders if any of our readers was caught in the hook of the title?
Designed by Kit Carson and manufactured and distributed by CRKT, the M21 is a heavy-duty version of CRKT’s famous M16 line of knives.
Unfortunately this M21 is not the famed military variant of the classic M-14, nor a Norinco clone version of that illustrious firearm. In this installment of TPF, the M21 reviewed is an enhanced cousin to the M16, a folding knife designed by Mr. Kit Carson roughly a decade ago. Using his decades of military experience, personal knife making skills and outdoor knowledge, Mr. Carson designed the M16 to be a true functional knife. In 2003 the M16 was voted one of the top 10 tactical folder knife designs by Blade Magazine. The M16’s legacy has continued to this day as it is still in production and is still used as a benchmark versus other knives. The M21-14G, as stated before, is an enhanced brother to the M16, measuring an impressive 135mm (5.3″) long while closed and massing a fair 167 grams (5.9 oz.). These larger blades of the M21 series have also earned the nickname of ‘Big Dog’ for it’s overall size and sporting a 3.6mm (0.14″) thick blade with a length of 98.4mm (3.87″). The M21-14G version in this TPF installment has a self-described as a deep-bellied spear point profile, measures 235.0mm (9.25″) when fully opened and features a trademarked series of Veff™ serrations.
Bigger handle, tougher blade, more carry options equate to a full redesign of the iconic M16 into the M21
Open length of over 230mm
For those individuals who are unfamiliar with Veff™ serrations, they originated on commercial knives back in 2006 and TPF has quoted from Mr. Veff’s website the following:
Veff™ serrations are unlike traditional serrations which are usually small scallops oriented at 90 degrees to the blade cutting edge. Veff™ Serrations are wide and cut at about 50 degrees to the cutting edge. The resulting cutting points bite instantly and dig deep upon contact while the large surgically sharp valleys slice smoothly and effortlessly. Unlike traditional serrations that tend to snag and stick while cutting rope and similar material, Veff™ Serrations slice through cleanly and easily. This produces dramatically improved cutting ability on rope, webbing, strapping, hoses, leather and vegetation. Veff™ Serrations have been extensively tested and have proven to be the most efficient and effective serrations to date.
CKRT has in fact exclusive manufacturing rights to this design, other than Mr. Tom Veff customizing the serrations onto selected knives. The orientation change creates an effect similar to a series of miniature gut hook style cutting surfaces. The profile increases the cutting surface length of the serration edges, the small ridges between help create the sawing effect and draw the item being cut into the edge.
Showing off the Veff serrations and Kit Carson’s signature knurled thumb studs, the M21-14G is a hefty folder
The blade of the MG21 is manufactured from 8Cr14MoV stainless steel like many CRKT folding knives and is one of the higher quality knife steels available from China. The metallurgical properties place it somewhere between 440B and 440C stainless steel characteristics. With the blade hollow ground and treated with a Titanium Nitride coating, the M21-14G is a very sharp and imposing looking tool. To open the knife, a pair of knurled thumb studs are attached to the blade’s spine for ambidextrous opening, as well as the “Carson Flipper” incorporated in the blade itself. The Carson Flipper was introduced nearly 15 years ago and is a kick incorporated into the actual blade which allows for partial opening of the blade through use of a finger on along the back of the closed knife. Now a very commonly feature on SAO knives, this version of the kick is used in conjunction with a slight wrist movement to obtain blade opening speeds similar to spring assisted knives. When the knife is in open position the ‘Casron Flipper’ tab also serves as a means of preventing the user’s hand from sliding into the cutting edges during usage.
This M21 is a very large and beefy blade which is locked into position via a liner lock, and CRKT also utilizes an AutoLAWKS system on the blade which prevents inadvertent closing of the folder. The AutoLAWKS is a spring actuated lever which interposes itself behind the liner lock once the knife is fully opened. This prevents the liner lock from slipping out and having the blade close at inopportune times. In order to close the blade , the AutoLAWKS. lever must be shifted, which allows the liner lock to be disengaged. This can be done one-handed with practice, but would require time and repetition to make such a smooth manoeuver. The 14G blade version incorporates grips manufactured from black G10 and have a textured surface finish to allow a firm grip regardless of weather conditions and the grip halves are retained by a set of Torx-head screws. While the knife itself comes with a retention clip setup for tip down carry and located on the right side of the knife, there are provisions for mounting the clip on either side and in tip-down carry positions. The clip is also secured by a trio of Torx-head screws.
Closed position focusing on the Carson Flipper with CRKT’s AutoLAWKS lever along the spine of the M21. Also showing the default position of the pocket clip
Designed by Mr. Kit Carson to be a rugged, heavy-duty knife based upon the successful M16 predecessor, the M21-14G has an MSRP of $89.99 USD. Other options for this size M21 include double ‘Carson Flipper’ tabs to create a cross guard, colouration changes, and the option for a plain ‘Razor-Sharp’ cutting edge. TPF Online thanks CRKT for its support in allowing us to continue to review its product lines. The M21-14G which is available at many locations across Canada including Wholesale Sports which has numerous storefronts and an online store as well. The final decision on the knife’s classification of Tactical, Practical or Fantastical is up to you, the reader.
The M21-14G initially being opened for reviewing by the author. What a fine piece of kit with minimal fluff packaging
Camping or hunting, SOG’s Woodline is an answer…
This author has had many opportunities to review knives of several manufacturers, and yes; even more are upcoming. However, once in a while, a slightly different knife comes about from the rest of those which have already been examined by the hands of TPF. Now as has been stated previously, and will be stated again, the authors of TPF are not knife experts, while the terminology and knowledge are still being accumulated, TPF should not be categorized as an expert. At this time, that is… Today we get to look at a sample of SOG’s product line, the Woodline series of knives. According to SOG’s website:
That feeling of leaving civilization behind as you move out of the valley and into the woodline is the inspiration for this series of fixed blades and folders.
With an upswept tip, the cutting edge of the Woodline is long and flows into the overall design.
The Woodline series of knives consist of both a larger fixed blade and a smaller folding blade design. At one time a smaller fixed version was offered but it was discontinued for 2012. Now for the meat and potatoes of this review. The Woodline fixed blade is a non-serrated, trailing point design which measures 264mm (8.4″) overall and masses 235gr (8.3oz); resulting in a large knife for belt mounted EDC. In the author’s opinion this is a field knife, carried and utilized in specific situations such as hunting, camping and other outdoor pursuits which allow for extra bulk and mass to be carried.
With many thumb grooves on the spine and a large finger groove in the bolster, the knife has many good control features.
Secured in 7oz leather
The extremely long curved cutting edge of the Woodline’s 122mm (4.8″) blade designed to a good knife for skinning, and with the 3.8mm (0.15″) thick spine the blade can withstand considerable abuse. Made with the standard SOG material, 8Cr13MoV Stainless steel, the knife itself should be able to keep an edge well and be readily sharpened. On the back of the spine are numerous thumb grooves to aid in fine blade control, which is required to prevent unwanted cuts and nicks with the upraised blade tip. The bolster, the metallic section between blade and handle, is made from cast stainless steel and creates the large finger groove in the handle’s grip profile. The tang of the knife is completely encased in very smooth hard wood which is retained by a series of stainless steel torx head screws. The final accoutrement is a lanyard loop consisted of a stainless steel tube imbedded in the end of the handle.
The sheath is composed primarily of 7oz leather with the reviewed piece having a nice uniform dark brown colouration. The leather sheath not only covers the entirety of the blade edge, but nearly the entire bolster and a small portion of the hardwood handle. Blade retention is accomplished though a single leather strap using a press snap button. This strap wraps around the generous finger groove formed in the bolster of the knife. A single belt loop, also made from 7oz leather and 20mm (0.8″) in width, is riveted place. A basic SOG logo is branded into the face of the sheath.
SOG’s Woodline fixed blade has nice curves and is complimented by the simple and functional sheath.
The Woodline fixed blade knife by SOG is an impressive looking product , appears to be very well made and creates an attractive package with the dark leather sheath. The only additional observation which can be made by TPF is that the knife itself is made outside of North America, which does keep manufacturing costs down, but may affect the purchasing decision of prospective buyers. The SOG WD-01 Woodline, large fixed blade knife as reviewed by TPF, has an MSRP of $60USD and is available with many Canadian retailers including various Canadian Tires stores across Canada.
The question, as always, posed to you, the reader, is whether this item is Tactical, Practical or Fantastical?
Back to basics – Lessons and results by Gerber
The Card packaging for the Gerber Basic knife
With advances in technology and more advanced manufacturing techniques, ergonomic sculpting, exotic shapes, and highly technical mechanisms have seemed to become a mainstay of many of today’s manufacturers and Gerber is no exception to this as evidenced by the creation of the Flik multi-tool previously reviewed here at TPF-Online. Gerber has been around for quite a number of years and has made countless designs of knives, multi-tools, and other products which are used by a great many people around the world. However they realized that as technology advances, there is still a very basic principle which needed to be heeded.
What is the basic definition of a knife? A tool used for cutting. That was the entire concept behind the knife being reviewed today. The Basic, a fixed blade knife by Gerber was designed and began production several years ago. As stated, it was a throwback in design with the primary factors being size, generic functionality and durability.
The Basic is just that, a very basic everyday utility knife. Featuring a 76.2mm (3.0″) drop point blade design, the blade is very typical for many knives and follows a sabre ground profile for strength. The cutting edge is partially serrated for true multi-purpose design utility. With the spine/full tang measuring 3.8mm (0.150″) in thickness, the robustness of the design is very apparent. While the overall knife length of 168mm (6.6″) makes the handle small, the huge large finger groove/choil behind the blade edge allows for a very secure grip. Due to this large choil it almost appears that the small grip panels were added as an afterthought to the full tang of the Basic. TPF has noticed however that the blade length has been listed at various sites, including Gerber’s, as nearly 86.5mm (3.40″) in length which would be measuring from blade tip to the leading edge of the grip panels. The grip panels themselves are not spectacular, primarily being made of nylon, and each side is secured into the full tang by three small Torx head screws. However a large portion of these nylon panels mount Gerber’s TacHide™ grip material which is very soft and provides a very secure grip on the knife. The full length tang incorporates a trio of scalloped indents on the spine as thumb ridges, in addition to the large lanyard loop incorporated in the full tang and accentuated by the grip panels.
The knife is truly basic in design, the sheath is not…
Showing off the TacHide inset panels and the large lanyard loop
TPF was unable to determine the mechanical properties of the steel used to manufacture the Basic, but a source says that the blade is most likely constructed with 420HC stainless steel, which is nearly a default for Gerber products unless otherwise indicated. The entire blade and tang are nitride coated for additional corrosion resistance and results in a generally matte dark grey finish. Overall knife mass is roughly 105 gr (3.7oz) which is considerable when combined with the very small size of the knife itself. It seems to be a success when measured against the basic design principles used for it’s creation. However, TPF will note that the handle profile, while designed for extreme comfort and great control, is somewhat diminutive for those individuals whom have larger hands as the knife becomes a three finger profile.
Slightly pushing on the upper edge of the sheath reduces the tension friction retaining the Basic
The sheath of the Basic is the complete opposite of the knife in terms of simple design criteria. Created from two molded halves mated together, the completely polymer sheath is a marvel of modern design. A plastic tension catch is part of the molded sheath and securely retains the Basic knife with a force that would potentially overcome the reversible metallic belt clip. The clip is positioned for right handed carry and is made of a stainless spring steel. Retained by two small screws similar to that of the belt clip, a small metallic plaque is on the opposite side of the sheath proudly displaying the Gerber name. TPF did not try to reverse the clip as the durability of the sheath is most likely the weakest point of this entire package. Combined the Basic knife and sheath measure only slightly longer than the knife itself at 173mm (6.8″) and the small package, while fairly heavy is indeed a worthy addition to nearly person’s knife inventory.
The large finger groove, TacHide grip and thumb scallops made the Basic very easy to handle.
The Basic knife as offered by Gerber Gear, is a fixed, partially serrated blade which has an MSRP of 43.00USD, and is available at many outdoor supply stores as well as online retailers such as www.canadiansafetysource.ca. As usual however, it is up to you the reader to decide if the Gerber Basic is Practical, Tactical, or Fantastical.
A general workhorse knife? SOG may have it already!
The title easily sums up what the focus of this instalment of TPF will be regarding. It has been called the most most popular item produced by SOG Specialty Knives and Tools. However, isn’t some fancy multi-tool, which TPF does enjoy reviewing by the way. Nor is it some flashy folding knife with all sorts of carry options, which TPF also likes to see. It just happens to be a simple solidly built fixed knife titled the Field Pup I.
From the box imagery, 3D modeling was used to design the Field Pup
Now here at TPF, we cannot fathom why SOG chose to label this blade the Field Pup, but when introduced in as a new product in 2002, the Field Pup was hailed as a very good all around knife. It’s larger brother the X-42 Field Knife, won in 2003 for Field and Stream’s Best of the Best for design and overall capabilities for a conventional and utilitarian blade. While the X-42 field knife is no longer produced, the Field Pup mimics most of the features that were so highly appraised on it’s bigger brother.
Sporting a minimal recurve edge, SOG's Field Pup I is a sleek blade for nearly all outdoor usage
Sporting a 102mm (4.0″) blade whose spine is an impressive 3.3mm (0.13″) thick the Field Pup shows off it’s primary feature quite well. The flat ground blade has a slight drop point profile with the back edge being nearly linear, and featuring a slight recurve cutting edge which adds to the utilitarian design of the knife itself. A recurve blade feature is supposed to lend itself to aid in slicing (draw-cuts), and on larger blades allows for more mass to be closer to the tip of the blade and promote higher chopping ability.
With large, moulded grip and checkered texturing, the Field Pup is very comfortable to wield
The grip of the Field Pup is manufactured from Kraton, a synthetic substitute for rubber, and is moulded around the full length tang of the blade. With better chemical, wear, and thermal resistance than rubber, the Kraton grips are a natural choice for a field knife that could be exposed to any environment and a large variety of tasks. The thickly moulded grip incorporates a trio of shallow finger grooves and has a very slightly compressible surface which, when added to the checkered pattern on the grip sides, makes this knife extremely comfortable and affords a very secure means of holding the knife. An aggressive thumb ridging on the spine of the knife enhances the ability for imparting force and control through any heavier cutting work that may be done with the blade.
The thumb serrations may be too aggressive for some
Overall this knife measures 216mm (8.5″) in length and masses 212.6 grams (7.5 oz) which is fairly lightweight as an all round field utility knife. The blade is manufactured from 7Cr17MoV steel, which TPF has been told is the equivalent of 440A stainless steel, and receives very well regarded heat treatment processes, which enhance both the wear resistance and edge retaining properties of the blade.
- The current fold-over sheath
Over the many years of production, the only alterations other than the text and logo have been the once included para cord lanyard loop and a selection of sheath designs. The two previous sheath for the Field pup reflected the trends of the times. A riveted, simple leather fold-over belt sheath and a larger nylon sheath with retaining snap loop and an accessory pocket. The current sheath is a fairly simple leather fold-over design which uses 2.4 – 2.8mm (6-7 oz) leather and has the retaining edges stitched. Recall that the older version was riveted, however, unlike the past version, today’s Field Pup sheath comes with a retaining snap loop. A generously sized, albeit thin, belt loop completes the sheath.
What may be the weakest component of the entire Field Pup package. The belt loop is not a heavy/robust design
A single variation of the Field Pup is available and the only difference the satin finish, as reviewed, is replaced by the blade being coated in a black titanium nitrite finish. Due to the immense popularity of this knife design, SOG also created a slightly larger version which is nearly identical in manufacture. These upscaled 121mm (4.75″) blade versions are called the Field Pup II.
Overall TPF finds the Field Pup I a very solidly constructed knife and understands why it has been such a popular knife for hunters, campers, and outdoors-men in general for all these years. The Field Pup I, model FP3 as reviewed, has an MSRP of $62.25 USD and can be readily found at a variety of stores, such as Warriors and Wonders in Vancouver, B.C.
The one true question that only you, the reader, can answer. Is the Field Pup I fixed blade knife, from SOG Specialty Knives and Tools; Tactical, Practical, or Fantastical?
Since 2002, SOG's Field Pup I has been a staple for outdoorsmen everywhere
Gerber’s Freeman Guide – A folder with authority…
Once again TPF delves into the realm of bladed tools and as before, Gerber Legendary Blades has become the focus of this review. Gerber has been around for over seven decades of creating tools for people, with an eye on edged instruments for use in nearly every application. As technology and designs continued to evolve, so did the products of Gerber, and for the last thirty years, the sword into the rock image has been the hallmark of that legendary brand and continues in a similar theme even with the latest logo change just a few weeks ago.
Awaiting purchase and use, Gerber's Freeman Guide Folding knife.
Now many designers at Gerber develop concepts and prototypes for a multitude of blades, tools, and equipment. When individuals come up with this blade design, it was so well received that it now bears his name in recognition. Named after longtime employee, Jeff Freeman, the Freeman Guide series of knives debuted in 2003 and are targeted specifically for hunters. Initially created as a fixed blade, the folder versions were introduced a couple of years ago. The Freeman Guide folding knife is the current generation of this knife family and we at TPF are pleased to be able to show you the details and specifics of this product from Gerber.
The Freeman Guide package only comes with the knife and a versatile sheath
The Freeman Guide Folder (FGF), is a classic drop point, liner-lock folding design which has several features that may appeal to hunters and other outdoors-men who would utilize it. With the 440A stainless steel blade measuring 91.4mm (3.6″), the FGF’s edge is not exceptionally long when compared to other similar style fixed blade knives. It does however offset that with a large profile and blade thickness; back to belly distance of 30.0mm (1.2″) and being roughly 3.0mm (0.120″) wide. This profile helps the FGF tip the scales at nearly 190 grams (6.6 oz), and while hefty in mass, the large finger grooves in the handle allow for solid grip and control of the knife. The grips themselves are manufactured from Gerber’s exclusive TacHide™ material and offer a comfortable, non-slip texture.
Definitely not small!
The huge and rugged lanyard slot
The blade itself mounts dual thumb studs for ambidextrous opening, and the liner lock is very strong and secures the blade open very well. The actual construction of the entire knife is very solid with the use of several Torx screws to secure all aspects together, from the massive lanyard opening on one end to the solid blade stop above the pivot. TPF will note that this knife does not have a pocket clip and at the mass of this blade, it is not a surprise considering the size of this folding knife..
The FGF’s sheath is black nylon belt sheath which has a typical button snap enclosure for securing the folded knife inside the pouch. Other than a trio of raised bumps over the top of the Gerber logo, formed into the surface, there is nothing extraordinary regarding the outward appearance of the sheath. However; the sheath’s construction allows for multiple mounting orientations which is a nice option for such a large folder. The These orientations has provisions for vertical mounting on a 38.1mm (1.5″) belt or horizontal mounting on a belt up to 31.8mm (1.25″) in width, and before some ask, no, this sheath is not molle compatible.
Even folded, the FGF is a large knife
Another version of this folder is available from Gerber, and it includes a gut hook on the blade as well, opposite of the knife belly. The gut hook version is slightly heavier but has the same features as the plain FGF reviewed on TPF. The Gerber Freeman Guide, folding knife is offered with an MSRP of $43 USD regardless of blade style, and is available at nearly all commercial Canadian Tire stores across Canada.
The Freeman Guide folding knife, designed for field use and abuse.
The Freeman Guide folding knife offered by Gerber Legendary Blades:
Tactical, Practical, or Fantastical?
Tactical, Practical & Fantastical 