While beat out in the origins of lever actions by nearly 20 years, one of the grandfathers of lever actions, the Winchester 1886, was designed by the legendary John Moses Browning. Seeing a trend towards bigger and heavier ammunition trends, Winchester commissioned for a newer design and in 1884, the conceptual action for the “future” 1886 was adopted and put into reality. The rifle was built to handle the larger cartridges available in that time period, which included the venerable Government 45-70. For nearly half a century the Winchester 1886 was produced in numbers that exceeded 150,000 units. By the end of it’s run in 1935, this workhorse of a rifle had been chambered in several different calibres and had proven its worth to firearms owners across North America.
U.S. Patent 306,577, was granted October 14th, 1884. The design in very simple terms added a set of moving locking lugs which ensured the solid lock-up of the breech block, and thereby allowed higher pressure cartridges to be utilized in a lever action design. Previous actions were locked up via toggle links which were insufficient to withstand the more powerful cartridges that were appearing and desired by the firearms enthusiasts of that era. When the first production of the 1886 rifle was started there were only three calibres available for it. These were the .45-70 Government (1873), .40-82 WCF (1885), and .45-90 WCF (1886).
A lesser known fact is that in 1886, the first smokeless powder cartridge was created for military use by the French in the form of the 8mm Lebel, but this would take time to filter over into the North American market.
In 1887 several more cartridges were introduced specifically due to the 1886’s popularity, and those were the .38-55 WCF, .40-65 WCF and the .38-70 WCF. The large .50-110 Winchester was added in 1899, and a few short years later, after the turn of the century, the first cartridge without a black powder history, the .33 WCF, was added into the lineup of calibres.
So now that TPF has gone down a but of history of the classic Winchester 1886 lever action rifle, it is time to fast forward nearly one and a quarter centuries later and Italian gun manufacturer, Chiappa Firearms, has endeavoured to produce a reproduction of the venerable Winchester 1886 with modern craftsmanship and quality materials. That means that parts will be 100% interchangeable between the original 1886’s which were all hand fitted for each firearm manufactured. What fit perfectly in one 1886, could just as likely be too loose, or very tight on another 1886 which meant a lot of labour and “fiddling” was required to ensure a perfectly smooth action and precise lock up. The rifle being looked at is a full length 1886 reproduction with a full octagonal barrel chambered in .45-70 Government.
Specifications of the Chiappa 1886 Lever Action Rifle
- Calibre: .45-70 Government (Modern loads)
- Barrel: 26″ (66cm) Full Octagon, 1-18″ twist rate
- Receiver: Case coloured frame
- Capacity: 8+1 (Shipped with internal plug to 5 as per Italian law)
- Mass: Approximately 9lbs (4.1kg)
- Overall Length: 45″ (115cm)
What is case colouring? In the past when firearms were manufactured from softer iron, they needed to harden the outer surfaces of receivers to improve the wear and toughness of the components. Hardness of a metal is usually determined by the amount of carbon that makes up the metallurgy of the metal. In the distant past, to surface harden iron products, was accomplished by packing the iron in a mixture of ground bone and charcoal or a combination of leather, hooves, salt and urine, all inside a well-sealed box. This package is heated to a high temperature, below the iron’s melting point, for a sufficient time to have the carbon infuse/permeate the iron surface. The longer this carbonizing process, the harder the surface becomes due to greater levels of carbon penetrating into the surface. The resulting case hardened part, due to the impurities in the packing mixtures, created an oxide surface which had patterns of colours and hues ranging from orange to dark blue. This surface was harder and showed better wear and corrosion resistance which was usually the sign of a higher quality firearm in that bygone era. That was known as “Case Hardened Colouration”, yet in modern manufacturing steel, an iron and carbon alloy, is used which has inherent hardness levels and much better resistive properties than the old school materials utilized. What this means is that while the components are no longer case hardened the old fashioned way, the colouration, as if the parts had been produced as such, creates a very attractive decoration.
The modern day 1886 manufactured by Chiappa obviously falls into the latter category and has applied case colouration to nearly every major external metal component except for the barrel, magazine tube, breech block and feed gate. That is correct; the butt-stock plate, the lever arm, trigger, hammer, and even the fore-stock cap are all case coloured. The nearly black bluing on the barrel and magazine tube and the wonderfully vibrant walnut wood stock and forearm make for a wonderful visual piece of eye candy. Necessary? No. Beautiful? Yes.
The firearms itself is pleasant to shoot, TPF took the 1886 to a local range and proceeded to lob small ashtrays down range. In all seriousness, many thanks to The Gun Centre, located in Kitchener, Ontario; for providing TPF-Online some ammunition to perform actual field tests on this rifle. Winchester Ballistic Silvertip 300gr, Remington Express Rifle 405gr SP, and Hornady Leverevolution 325gr FTX were all used, sixty (60) rounds were fired with no issues and acceptable out of the box accuracy. Using 15cm (6″) steel targets at 45m (50yd), the author was able to hit several runs of five consecutive shots, at least until a flinch started to develop. While quite enjoyable to shoot offhand, the author of this piece will likely not shoot 405gr rounds. or anything similar, from the bench ever again.
Chiappa’s Model 1886 lever action rifle, is a modern day reproduction of the classic Winchester 1886 design chambered in .45-70 Government. With an MSRP of about $1,500.00 USD it is not for the cheap and frugal, nor those who penny pinch on ammunition. Chiappa firearms are distributed through Canada by North Sylva, so if you are interested, retailers akin to Barton’s Big Country Outdoors, located in Grande Prairie, Alberta, should be able to order them for you.
It is a serious rifle in a beautiful package. However if you were looking at this rifle and debating to purchase it or even look at one; ask yourself this, is it Practical, Tactical, or Fantastical! Then go buy one anyways, because more guns = more fun!
NOTE: The basic 1886 rifle featured in this installment of TPF is scarcely available nowadays. The trend has been the Chiappa Kodiak which has a synthetic stock, and a stainless steel constructions, with a shorter barrel.