Reviews & articles for shooting sport enthusiasts.

Posts tagged “BUS

A mission is necessary to achieve one’s goal! TPF brings furniture to the table.

Furniture. No, it is not the type you would park your derriere on, snuggle up with a significant other, or watch an action packed movie from.  Furniture in this case is the nickname for the swappable ergonomic components which are used to customize a firearm to a particular owner, or to make the firearm “universal”. These components may vary depending on the individual rifle’s design, but normally include the stock, grips, fore stock, and some accessories. In this edition of TPF, we talk about furniture and a recently looked at firearm.

Mission One: Should the TPF team choose to accept it. Outfit the LSMR with a complete set of fully adjustable and customized furniture. Queue the Mission Impossible theme song….

Challenge Accepted!

We are taking our LSMR Gen1 Intro Rifle and outfitting it with some alternate ergonomic hardware that is offered by Mission First Tactical, aka MFT. The LMSR has a commercial sized buffer tube, standard A2 grip, and mounts a carbine length, two-piece, captive hand guard. All of these are of course in the factory colour of the night sky. Black. The majority of the MFT components used for this build were produced in their newest colour, “Scorched Dark Earth” which is a light brown more suggestive of the desert, but provided a great contrast to the original LMSR and it’s corresponding components.

The stripped LMSR

Factory installed furniture removed from the parent Gen1 LMSR Rifle. Unadorned the AR-platform has an odd appearance.

The New Components:
BUS – Battlelink Utility Stock – MSRP $124.99 USD
The first component to be incorporated is the simplest to change. The Battlelink Utility Stock is an adjustable stock manufactured from high impact polymer that is a slide on replacement for the original collapsible butt stock. There are a few features which set the BUS apart from the factory LMSR stock. The BUS has a slew of sling attachment options available, including front and rear positioned quick detach rings accessible on both left and right sides. These are in addition to the trio of dedicated sling slots incorporated into the stock’s lower cage. A non-slip rubberized buttpad is angled for universal usage and is hinged at he base of the stock’s cage. Normally locked in place by a spring loaded release latch, the opened buttpad exposes a water tight stowage compartment in the stock itself. The Compartment comes with a set of foam inserts and a pull cord that is available for customization and rattle free component storage if required. Additionally, there are various grooves and attachment nooks and patterns incorporated in the BUS to accessorize with other MFT products. BUS mass: 255.7 grams (9.02 oz)

MFT's BUS

The Battlelink Utility Stock

BUS's compartment

BUS’ watertight compartment

BACP – Battlelink Adjustable Cheek Piece – MSRP $29.99 USD
As mentioned in the description of the BUS, the Battlelink Adjustable Cheek Piece is an accessory which securely attaches to the BUS and allows for full customization of the stock for a cheek weld for using a sighting system of the user’s choice. The BACP comes with an Allan key and a knurled screw adjustment tool to be used for installation and securing height adjustments respectively. With a full travel range of 31.8mm (1.25″), the BACP has a wide range of possible positions. There are markers on the BACP which show where position will interfere with standard charging handle operation, but since this item is likely to be used with those who are running magnified optics for long range shooting, this likely will not be an issue. BACP mass: 77.1 grams (2.72 oz)

MFT's BACP

The Battlelink Adjustable Cheek Piece

G27 – Tactical AR15/M16 Pistol Grip – MSRP $24.99 USD
The standard A2 style plastic grip, while functional enough, is not an ergonomically styled component. We at TPF chose to utilize MFT’s Classic G27 Tactical pistol grip. The G27 has several enhancements over the standard grip. The G27 adds in finger grooves, palm swell, upper hand-web support and a contoured back-strap which allows for a more secure fully seated grip, which in turn allows for increased operator comfort, control, and reduced hand fatigue. The G27 also has varying surface textures which allow for a secure grip even in wet conditions. The grip also has a secure watertight compartment. The end cap for the grip compartment is secured with a quarter turn cam action locking system. G27 mass: 96.4 grams (3.40 oz)

MFT's G27 Grip

The fully contoured G27 pistol grip

G27's Compartment

Positive locking, watertight compartment

M44S AR15/M16 Military & Police 4 sided rails – Carbine – MSRP $59.99 USD
Ditching the standard two piece forearm guard, TPF mounted another MFT Classic component in it’s place. The M44S is another polymer manufactured part which, unlike a typical upper and lower two-piece hand guard, actually splits on an angled plane 45 degrees from the norm. When the components are secured between the delta ring and the gas block’s hand guard cap, they are solidly in place with no noticeable play or twist. The M44S is a “fatty”, meaning that it is a thicker profile that the standard tapered hand guards common with many AR platform rifles. This means that the inner sides of the guards are further away from the barrel and lack the otherwise required heat shields for sustained shooting. When properly installed, the quartet of picatinny rails, which are part of the molding, are situated top, bottom, and both left and right sides as most other railed systems. The rails themselves are surprisingly resilient to clamping forces and damage and are fairly sharp. Also included with the M44S are a set of four, full length, thermal rail covers. These covers are manufactured from a softer rubberized, non-slip material that is easily cut to desired length if needed. The only interesting detail other than the perfect fit onto the M44S, is that unaltered rails can only be installed fully in a single way; they are uni-directional. Not a big deal if one uses a full cover, but possibly an issue if the cover is to be sectioned off for other rail mounted components. M44S mass: 210 grams (7.4 oz)

MFT's M44S

A carbine length, two-piece rail hand guard set with rail covers

M44S' details

The rail covers fit perfectly and give positive grip

RSG – React Short Vertical Grip – MSRP $24.99 USD
The addition of a vertical grip is supposed to enhance the capability and control when in close quarters battle, aka CQB. While TPF thinks of this build of MFT components as more of a long range platform, the React Short Grip was included. A simple rail mounted grip, the RSG is indeed fairly short but adds yet another small watertight storage compartment. Like the BUS, the RSG compartment has an insert for rattle free storage. It differs however that the insert is specifically designed for holding batteries, three (3) AA or two (2) CR-123 batteries. The RSG also incorporates a texture similar to the G27 pistol grip for a secure grip in wet conditions. The end cap is rubber and can double as a short mono-pod for supported firing positions. RSG mass: 56.7 grams (2.0 oz)

MFT's RSG

React Short Vertical Grip with compartment parts

RSG mounted

Seamless and secure, the RSG mounted on the M44S

BP1 – Universal Equipment Mount – MSRP $24.99 USD
For a stable long range shot, a bipod of some sort is usually required and the Universal Equipment Mount offered by MFT allows for a slide on, rail mounted, metal sling stud. Secured in place by a spring loaded position locking detent, the BP1 is very easy to attach and detach to any available rail. The unit itself is made from the same polymer as the other components and while reviewed in Black colour, is available in all the same colours as other components offered by MFT. BP1 mass: 53.8 grams (1.9 oz)

MFT's BP1

The Universal Equipment Mount has a quick install/removal ability

Bipod mounted

Using the PB1 for a bipod mount

Magazine Coupler – MSRP $14.99 USD
What build would not be complete with out a way of holding more ammunition close at hand for increased fun factor. Please recall that at the present time in Canada, the only legal usage of the AR platform is at an approved range. So while making your handicapped thirty (30) round magazines look cool, a pair combined with these couplers still only gives you an additional five (5) rounds instantly at hand for reloading. Supposedly fully compatible with magazines for the AR-15, Mini-14 as well as for Magpul P-mags. Coupler mass: 39.7 grams (1.4 oz)

MFT's Mag Couplers

When you need more ammo on the firearm… Mag Couplers

The Package Complete

Too bad those mags combine for 20 rounds in Canada. The couplers are good for fast reloads

As this TPF installment is specifically for Mission First Tactical products, no additional information will be made about the other accessories used for this build. Changing the furniture on an AR platform is almost ridiculously simple if you have the proper tools.
Com-Mil-Spec Stock ExampleThe collapsing butt stock is removed by simply pulling the stock position index pin out to it’s maximum amount. The adjustment lever normally incorporated on collapsing stocks only lifts the index pin out a limited distance to clear the buffer tube indexing holes. The only concern for components is whether the rifle you are planning to swap components out of has a commercial or military specification buffer tube. The diameters are 29.67mm versus 29.16mm (1.168″ vs 1.148″) respectively. A commercial buffer tube has an angled end, and the mil-spec tube has threads that protrude outside the buffer tube diameter.
The grip is held in place with a simple hex socket cap screw. Use a 3/16″ hex wrench that is at least 150mm (~6″) in length for removal and installation of grips. Make sure not to lose the spring or the detent for the safety mechanism. If you lose the detent, but install the spring, the safety will not operate due to binding. Readers need to just imagine how we at TPF know this… Trust us that you will only ever do it once.
For the hand guard it is tricky if you do not have a proper tool as the D-ring is help in position by a set of fairly strong springs. Now some individuals may be strong enough and coordinated enough to compress the D-Ring enough to remove existing hand guards and/or install new ones. There are hand guards which are free floating, but to switch them out normally requires the removal and/or replacement of the front sight/gas block plus the removal of the D-Ring and the retaining assembly. That information is easily found through your favoured online search engine such as Google, and may be featured in a future installment of TPF.

The build challenge completed

CHALLENGE COMPLETE! Outfitted with the above listed MFT products, LMSR has been customized for an individual’s specific requirements and purposes.

MFT QCB version

The MFT build, slightly modified to a CQB version

A complete furniture replacement with Mission First Tactical products used in this build has a total MSRP of $304.93 USD. These products are available at various firearms retailers across Canada such as the Fredericton Gun Shop, located at 81 Sunset Drive, Fredericton, New Brunswick, or Bulls Eye Sports – London, located at 820 Wharncliffe Rd South – Unit 32, London, Ontario.

The question to you the reader is very simple as always. Is customizing your firearm with these MFT components Tactical? Practical? Or fantastical?

Advertisements