Getting brass clean enough for reloading is a dirt simple thing in principle. Wipe clean the outside of the case to ensure does not scratch or deform the brass due to dirt and debris while it feeds into a reloading die. That is all fine and dandy for someone who doesn’t really expend any volume of brass or regularly utilizes a Lee Loader for reloading, but what about the inside of the case? The primer residue and build-up in the pocket? What about tarnish and accumulated dirt and grime? 1911 owners who reload would loathe to leave behind scores of free .45 ACP range brass regardless of how dirty is was. The author fully embraces his Dutch heritage stereotype and if there is unclaimed, spent, centre-fire brass lying about at the local shooting range, it’s getting picked up. Firstly because it’s free brass, and secondly because the author likes to leave the range cleaner than when he arrived.
What to do with the hundreds of free pieces of brass of 9mm Luger or .223 Remington that are strewn about the range on a nearly daily basis? Unfortunately you will likely need to clean them from dirt, grass, and exposure to the elements. Sorting is also an issue, but that will be addressed in a future installment. Back on the topic of case cleaning; TPF did a overview of a Hornady Ultrasonic Cleaner a while ago, and while that method does indeed clean out all the impurities, it does not necessarily mean the result will be gleaming, shiny brass cases. Enter today’s entry into Tactical, Practical and Fantastical, Frankford Arsenal’s Platinum Series Rotary Tumbler. This unit comes complete with the tumbling drum and the drive chassis as well as with inserts, stainless media and a sample of concentrated cleaning solution.
But lets get to the details… The author has been collecting range brass for many years and as such has a fairly decent volume of spent cartridge cases sorted, and stored on reloading shelves. For this review, several hand fulls of .308 Winchester range brass was used for testing the effectiveness of this rotary tumbler. Only after the review did we count out 231 pcs of brass, a far cry from the 1000 pieces of .223 Remington that is claimed as working capacity.
What you get in the box…
- Drum driving base
- Dual layer drum
- Drum retaining cap (x2)
- Clear insert for cap (x2)
- Strainer insert for cap (x2)
- Bag of stainless steel media (2.27kg/5.0 lbs)
- Sample of concentrate cleaning solution
TPF looked over all the components of the unit and some items stood out for being remarked upon. The first item is the 1.85 gallon (7 litre) dual layer drum whose hard plastic outer shell can withstand the rollers and drive wheels and the mass of brass, pins, and liquids. Inside the drum is a softer rubber that is bonded to the inner surfaces of the drum. This is to quiet down the actual noise of an operating unit and also to ensure that the brass and pins tumble instead of just sliding along the inside of the drum. This is important as there are no protrusions internally to help agitate the brass and fluids while rotating. The end caps will normally be used with the clear window inserts which allow observers to become mesmerized by the continuous churning action.
The initial setup was used with the handfuls of de-primed brass, the sample pack of cleaning solution, and filling the container with supplied pins and distilled water. Distilled water, for those readers with a questioning expression, is a water that has most impurities removed and is listed to generate the best results. With the clear inserts in place and water tight, the rotary tumbler was started on a two hour adventure. With a dry media vibratory tumbler the unit settles into a manageable background noise that can be ignored easily. With an ultrasonic cleaner the noise is a hum, plus any case to case vibrations, which can be high pitch, but in general is a low noise level. Compared to either of the others, this rotary tumbler is is not even in the same class. It is loud, as in automotive versus airplane in noise difference… Now perhaps that was from not having completely filled the drum to capacity of cases to be cleaned and allowing huge space for brass and cleaning pins to shift around a large amount contributed to the noise level, it will be revisited in a future utilization.
The base drive unit of the tumbler is quite heavy and has a single set of driver rollers with the second set being a pair of idlng wheels. The controls are very simple for the power unit. It has a rotating dial which corresponds to the desired remaining time of operation. No on/off switch, just turn the dial from 0 to 3 hours. The rollers and geared drive units are listed as being rated for a maximum of a 13.4 kg (30 lbs) drum on top of the rollers. This published limit is there both to protect the drive gearing as well as the axles and plastic rotating wheels from excessive loads. For our review we set the unit into motion of a duration of two hours or the possible three.
The machine chugged away on top of the author’s reloading bench for just over 2 hours and the noise of the churning brass and pins, as well as the drive unit itself could be heard through the floor and across the author’s home. TPF recommends that if you utilize the this wet tumbler, that you perform the actual tumbling either outside, or in a garage as the operational sound level is quite high.
Upon finish of the 2 hours, the water in the drum was murky and dark, yet the cases gleamed like beacons in the grunge. This is where we find the biggest and perhaps the only flaw of this tumbling kit. The strainer inserts are one of the things that seemed lackluster and a far cry from practical. The operator needs to install it onto one end of the barrel and then flip it over to remove the second cover in order to “wash out” the drum and cleaned brass of dirty cleaning liquid and stainless steel pin media. The only problem is that the media does not come out as easily as Franklin Arsenal would lead you to believe. This determination was made AFTER using the strainer in an attempt to “Wash out” the stainless steel media from the cases. Some pins did indeed come out and fell into a home made filtering bucket. However getting fed up with having a clean drum, and pins stuck in cases still, the whole load was dumped onto the filter and the drum rinsed clean and put away.
At this point TPF used a rotary media separator that was partially filled with water which partially covered the load of cases in the rotating hopper. By spinning the hopper, the author proceeded to “separate” media from cases. This method worked spectacularly… What was left was a whole bunch of bright clean and very wet cases. Which is the second part that TPF is less than thrilled about, waiting for cases to dry… The author’s wife put her foot down when the oven was suggested as a means to remove the unwanted water. Luckily the time of year had a nice sunny warm forecast, and the cases were laid down to dry on a towel in the sun. And nearly 6 hours later when the author returned, the cases were dry and better than new in appearance.
The largest deterrents for stainless steel wet tumbling is the media separation, and the drying of the cases. However the end result of the entire process is an awesome level of cleanliness and sparkling bright brass. The resulting output from the Frankford Arsenal Platinum Series Rotary Tumbler (Model# 909544), is extremely clean and makes brass appear new once again. The reviewed unit has an MSRP of $239.00 USD, and can be found at brick and mortar stores across Canada such as Firearms Outlet Canada, located in Ajax, Ontario.
Is stainless steel, wet tumbling worth the investment and worth the time? That is for you, the reader to decide upon and determine for yourself if it is Practical, Tactical, or Fantastical.