Puns and horrible one liner butchery aside, the latest product is another from a well known Brand name and a regular manufacturer to be featured by TPF.
Many thanks to Gerber Legendary Blades and Tools for all their support of TPF Online and in turn the CSSA. In today’s review, TPF takes a look at a proven and still produced multi-tool that was first introduced in 2007. Gerber’s Flik was a variation of the Freehand multi-tool released the year prior and used many of the same features and construction techniques, albeit in a slightly smaller package. At a closed length of 112.0mm (4.41″), the Flik is still quite substantial for most individual’s hands. The nearly all metal construction and usage nearly every iota of available space in the tool itself, translates directly into its 250 gram (8.8oz) frame. The basic handles are identical to each other in basic shape and are constructed from stainless steel, sheet metal whose pattern is laser cut and then formed into a tight, well engineered, package. TPF notes that the while the forming is identical, the handles themselves have visual differences in labelling, which is stamped onto the handle blanks prior to forming.
Like nearly every single multi-tool manufactured, the jaws of the Flik are a common combination style of design which include a coarsely toothed oval shaped grasping area preceded by a needle nose on the tip and a side cutter behind it. Previously reviewed by TPF was a similar Gerber Tool, the Compact Sport 400, whose design bears a very similar if superficial design theory. However, the CS400 had one drawback which is alleviated by the Flik’s design. That difference is easily noticed between the Flik and it’s simpler predecessors. The jaws have some addition mechanical locking mechanisms attached to the jaw release buttons. These additional items act as a handle lock; preventing the handles from inadvertently opening when the jaws are retracted. When extended to its full 147.5mm (5.81″) length the Flik’s jaws locking mechanism, ratchets the handles slightly apart, preventing any pinching of the hand when squeezed together.
Unlike many multi-tools, the Flik has one very important feature that is underscored by the innovative one handed opening system used by Gerber… All of its additional tools are accessible without opening the handles. Not just some of them but all of them. On the outer edges are the larger tools and blades, and the inner tool arms are extended through use of the lock bar sliders, which partially lift them out of their respective storage positions and allow the user to access them via nail nicks. An interesting construction detail noted by the TPF staff, is that the external tool arm lock mechanisms and the corresponding internal tool arms are mounted with a separate formed sheet metal chassis. This chassis is retained by the tool arm pivot bolt assemblies, but is very well engineered and precise in its forming. While the total number of tools is not extravagant as in many nested tool designs, the tool arms in the Flik are separated by thin washers to prevent clumping when extending tools.
TPF-Online will list the tools in order from the larger external ones, to the internal parts to give readers a listing of what is available on the Flik multi-tool, beginning with all the tools on one handle and then listing all tools located on the opposite handle.
Blade #1: Mounted on the outside of the handle is a sheep foot shaped blade, featuring a saber ground edge; measuring 69.9mm (2.75″) in length from the handle. Due to the elongated hole present in the blade’s spine, the knife can be opened one handed with patience and practice. It is as evidenced by the amount of material on the edge side which is not sharpened (also known as the Ricasso) to help when opening one-handed.
Sawblade: On the opposite outside edge of this handle is a 76.2mm (3.00″) saw blade which uses triangular profile, opposed teeth with approximately 17 teeth per inch. The tip of the sawblade is angled upwards (without teeth) for a distance of 6.3mm (0.25″) to prevent binding while sawing. The angled tip lifts over the surface being cut and reduces accidental driving of the leading edge into the material being cut. As with the previous blade, an opening on the sawblade is provided for one handed opening. Please note that the saw teeth run the entire length of the blade.
Screwdriver #1: A very small and flattened Philips #1 driver. Located centrally in one of the Flik’s handles, this internal tool arm must be initially lifted using the sliding lock mechanism it is mounted upon (as are all internally mounted tool arms).
Can Opener: A can opener, self explanatory for nearly everyone.
Blade #2: On the opposite handle, the first outer mounted tool is a fully serrated blade which measures the same as the previously mentioned straight blade. However, the tip is blunted and the blade is more rectangular in profile. As with the standard blade, an opening hole is present to allow for one handed opening, as well as the Ricasso.
Scissors: The trademarked Fiskar brand of scissors is incorporated into the outer handles of the Flik and as all Fiskar style scissors, operates flawlessly with a positive opening and closing due to the mounting design of the spring arm. While able to extend the scissors with a single hand, it takes some skill to fully manipulate the scissors into the proper cutting configuration.
Screwdriver #3: A 5.0mm (0.2″) flat tip screwdriver which has a bottle opener included. Also mounted internally.
Lanyard Loop: The Flik includes a retractable lanyard loop, which is interesting as it is the only part that requires an external tool to extend from the tool itself.
Now TPF-Online has commented on the sheath used on the Compact Sport 400, and the Flik’s is identical in construction intent and features. Able to securely hold the Flik, with jaws either retracted or locked into full extension; the velcro flap and vertical belt loop allow for easy and comfortable wearing. As a multi-tool, the Flik has many of the commonly used features required by many for EDC, and the ease of use of the pliers and easily deployed blades and larger cutting tools are a bonus. The only drawback is the smaller size of the secondary tools, which may limit effectiveness and/or functionality of those respective tools.
Overall, TPF finds the Gerber Flik a solid and well designed multi-tool with enough features and a simplified usage that should be appealing to a wide audience. The Flik model reviewed (#22-41054) has an MSRP of $65.00 USD and can be found at various locations and online stores across Canada such as Outdoor Pursuits Canada, located in Black Diamond, Alberta. The Flik can also be obtained with a black oxide finish as well.
As per the norm at TPF, it is ultimately up to you, the reader, to decide if the Flik multi-tool from Gerber is Tactical, Practical or Fantastical.