“The second most tedious thing?” That was surely the question of most readers when looking at the title of this installment of TPF-Online. Yes, the author did mean to say the second most. The number one most tedious job from the majority of reloaders is trimming brass to length and there are a multitude of methods to do exactly that. However this instalment is about the second most tedious thing for reloaders who utilize progressive presses from Dillon, Hornady, RCBS, etc… So what is the second most tedious thing in progressive reloading? Filling the priming system of the press.
There are currently three common methods used in primer feed devices. Tube, Strip, and Box fed priming systems. Lee progressive presses, like the Loadmaster, utilize the box feed systems for their progressive press designs and it is by far the fastest for reloading primers. RCBS progressives now routinely use a preloaded primer feeding strip system since it’s introduction over a decade ago. But for the rest, a primer fill tube is used for the reloading process to be have one hundred primers ready for reloading. This has, for many, been done via the old fashion method of using a primer flip tray and a primer collecting tube and manually forcing each individual primer into the fill tube. It can take several minutes for an experienced user to pick up a hundred primers, and so many people pre-load several of these fill tubes prior to reloading, which is hard on the hands.
Luckily however, the author occasionally peruses the internet for firearms related products and businesses at random, and it was not too long ago that TPF came across a Canadian IPSC shooter, Mr. Nik Papadhopulli, who decided to open up a small business to supply Canadian shooters with various items to help with reloading and equipment to help competitors with the shooting sports. One of these products offered is an accessory to help speed up primer tube filling. Now TPF knows about Dillon’s RF-100 primer filling station, which is a hands free filler. You put a box of one hundred primers in the top of the unit and press a button and couple minutes later you have a full tube. This option is quite costly with a price tag of nearly $400 including the option to be able to fill both large and small primer tubes. However, at roughly half the price of the RF-100, Red Tip Bullet offers an alternative to Canadians. The Pal-Filler, designed and manufactured in Italy by Palvik, is a hand held, battery operated, primer tube filler.
Smaller, cheaper, and faster, this product already includes the ability to load both small and large primers. Now the Pal-Filler is not some complex, ergonomic and aesthetically beautiful product. It is in fact relatively plain and basic is shape and operation. Included is a double-usage primer tray, where one side is for small primers and the opposite side is for large primers. This tray is attached to the handle/grip and a primer tube is inserted in the appropriate opening. Operation of the Pal-Filler is a simple affair and assumes that the proper primer tube is already pre-inserted into the Pal Filler tool.
- A box of primers is dumped into the flipping tray, and shaken until all primers are anvil side up.
- Once primers are all oriented properly, the user inserts the retaining lid.
- With the unit tipped slightly towards the tube filling hole, the user flips the switch.
- The vibration caused by a rotating offset mass vibrates the Pal-Filler and the primers all fall in sequence into the open tube top.
- Did TPF mention it was fast? From the primer box to a tube filled with one hundred (100) primers in roughly thirty (30) seconds.
The concept for the Pal-Filler is very simple. Use proven, existing technology in a compact package. The small electric motor is wired in series with the simple on/off switch and the battery holder. The motor mounts an offset mass that creates the high frequency vibrations in the unit itself. It indeed is simple and one may think that should not equate into a high cost. Normally TPF would agree, except the Pal-Filler is completely manufactured on CNC machines. The aluminum grip halves are both machined from a billet of aluminum, inside and out. The tray is CNC machined from a block of high density plastic. The motor retaining bracket is machined aluminum as well. Even the battery holder is given a CNC machined base to be mounted on. The design features for ruggedness and longevity are apparent when looking at the Pal-Filler.
Made from quality materials, with quality craftsmanship, this is a fine tool for the reloader who does not want to load primers into tubes manually and is especially suited to volume usage as done by many progressive reloaders. The Pal Filler as reviewed has an MSRP of $189.00 CDN and is available from Red Tip Bullets (
http://www.redtipbullet.com). The question posed to our readers is if this piece of equipment is Tactical, Practical, or Fantastical.
Addendum 2017… We have been informed that Red Tip Bullets has since closed its doors. Which is unfortunate.